Pojacalo za gitaru Peavey RAGE 158

SPECIFICATIONS POWER AMP SECTION Pre Gain & Post Gain @ 10 Reverb @ 0 Rated Power & Load: 15 W RMS into 4 ohms Nominal Levels are with Normal Gain @ 5 Power @ Clipping: (Typically) (5% THD, 1 kHz, 120 V AC line) 15 W RMS into 4 ohms Minimum Levels are with Normal Gain @ 10 Total Harmonic Distortion: Less than OS%, 100 mW to IO W RMS, 60 Hz to 10 kHz, 4 ohms (typically below 0.2%) Preamp Input: (Normal channel) Impedance: High Z, 1 M ohm Nominal Input Level: -6 dBV, 500 mV RMS Minimum Input Level: -23 dBV, 70 mV RMS Power Consumption: Maximum Input Level: 0 dBV, 40 W, 50/60 Hz, 120 V AC I VRMS PREAMP SECTION The following specs are measured @ 2 kHz with the controls preset as follows: Channel Select Normal (Out) Low&High@ 10 CD/Tape Input: Input Impedance: 100 K ohms Nominal Input Level: .5 V RMS, -6 dBV (Stereo jack designed for use with stereo headphone outputs on CD/tape players) Mid @ 0 Headphone Output: Load Impedance: 4 ohms or greater Nominal Power Output: 20 mW into 4 ohms (Stereo jack, monaural signal, disconnects internal speaker when phone plug is inserted) System Hum & Noise @ Nominal Input Level: (20 Hz to 20 kHz unweighted) 62 dB below rated power Equalization: Special low, mid, & high passive type EQ <br>