emGO Repeater za prosirenje vase bezicne mreze i dostupnosti wifi signala.
Model: U25
Ethernet port
Modovi rada : REPEATER, REPEATER WISP, ACCESS POINT, ROUTER, CLIENT i CLIENT WISP
Detaljan opis i specifikacija:
300 Mbps WiFi repeater with integrated antennas
supports all IEEE802.11b/g/n WiFi standards (2.4GHz networks)
up to 300 Mbps data transfer rate via the wireless 802.11n protocol
maximum WLAN security with WPA2, WPA and WEP(128/64)
WPS button for easy WPS security setup
can also be used as a normal wireless router
in ’repeater’ mode the LAN port can be used as wired network connection
practical signal strength indicator
technical specifications:
supported standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
wireless transmission rate: max. 300 Mbps
ports: 1 x 10/100M RJ45
chipset: Realtek 8196E
frequency band: 2.4~2.4835 GHz
channels: 1-13 (Europe)
power class: RF power 14 dBm (max. EIRP)
internal antenna gain (typical): 3 dBi ±1 dBi
receive sensitivity 11n : -70dBm@10% PER, 11g : -70dBm@10% PER, 11b: -85dBm@8% PER
spread Spectrum: DSSS
modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM)
transmission distance: up to 100 m (indoor), 300 m (outdoor open air), depending on the environment
power consumption: up to 3 W
supports 64/128bit WEP, complies with 128 bit WPA/WPA2
supported modes: Router mode, repeater mode, AP client mode
cascading: up to 5 levels (depending on usage environment)
dimensions: 90 x 40 x 60 mm (W x D x H)
net weight: 150 g
operating temperature: 0 ~ 40 °C
storage temperature: -40 ~ 70 °C
operating humidity: 10 ~ 90% non-condensing
storage humidity: 5 ~ 95% non-condensing
packaging: 1 pc, paper box
Amplifier (repeater) of wifi signal emGo-U25 provides widening of
covering and amplification of signal power and quality with an existing
wireless net and minimizes the places not covered by wi-fi signal in
your house or office.
With pressing the only button WPS on the router you will be connected
with the repeater emGo-U25 and with easy setting you will widen the
range of your wireless net.
No password is needed to remember for connecting new wifi devices! For
connecting a new notebook or a tablet just press the button WPS and you
will be automatically connected with an encrypted connection to your
net.
The repeater is capable to work in mode REPEATER, REPEATER WISP, ACCESS POINT, ROUTER, CLIENT and CLIENT WISP.
The repeater ensures full-valued NAT translation of IP addresses and works as a full-valued home gateway in the "Router"mode.
The minimalistis dimensions and design setting for a direct connection
to the 230 V socket provide the needed flexibility for frequent moving
according to the requirements.
You may set the repeater for connecting to the chosen wifi router only
the first time and then you can switch it off and on or move it to
another room, a terrace or in the garden according to your needs.
The most suitable position for placing the repeater emGo-U25 will be
found very easy with the indicator of signal intensity of wi-fi net.
A clear graphic indicator of signal power helps to choose the ideal place for placing the repeater.
In addition, the repeater emGo-U25 is equipped with an Ethernet port for connecting of device via a cable.
This equipment can be used for connecting of multimedia devices without wifi support, such as a TV or a satellite receiver.
Blu-ray players, game consoles, DVD players or smart TVs with Ethernet
support can be easy connected to the internet and your home network.
The Ethernet port works in mode WAN, or LAN depending on currently chosen device mode.